Viper Barrel Vise

The Viper Barrel Vise will handle barrels from .750” to 1.375“in diameter. The powder coat finish is so durable it grips barrels like a gorilla. The powder coat finish will also NOT harm the barrel in any way and will not leave any marks whether blued or stainless. With the Viper Barrel Vise there is no need for leather, spacers, cardboard or used toilet paper rolls! Please keep in mind the screws are NOT removable! Max torque on the barrel vise nuts/bolts should be 50 ft/lbs. DO NOT use an impact gun. Mounting holes are 1/2” diameter and 5.750 center to center spacing. This vise may leave marks on a Cerakote or painted barrels (use several wraps of frog tape to prevent paint damage). This vise may crush the carbon fiber part of a carbon fiber barrel.

The Viper Barrel Vise is constructed of 6061 aluminum. The bottom half is 1” thick, for added strength, when mounting to your work bench. All four hardened, threaded bolts have a support spring. These springs keep the top half from moving around during barrel insertion and removal. Each spring is fully captured on each end for stability.

SPECS: Base is 7″ x 3″ with 5 3/4″ c-t-c hole spacing for mounting; top plate is 3″ square; four 1/2″ bolts for clamping; and will accommodate 0.750″ to 1″ OD barrels.